ResMed H5i Humidifier Water Chamber – Heated Humidifier Chamber

The cleanable bowl can be disassembled and cleaned easily. Ideal for hospitals, sleep labs and multi-use locations.

The system, which prevents water from entering the device with its double chamber design, maximizes humidification and provides maximum benefit.

When should the humidifier water container be replaced?

When the table of your water bowl is calcified, you can change it when the heating is not efficient and humidification problems begin to occur.

Compatible models:

ResMed S9 Series compatible H5i heated humidifier

Attention!

Allow ten minutes for the chamber to cool as it may be too hot to touch after use. While cooling is taking place, a blue snowflake will appear in the upper right corner of the device's screen.

Maximum Fill Level Tips

Do not fill the water tank above the maximum fill line. Damage to your humidifier or device may occur. If the water tank is overfilled, water may leak out when closing the cap.

Only use distilled water at room temperature. Do not put any chemicals or additives in the water. Additional substances you add may cause possible airway irritation or damage.

Do not try to fill the water tank while it is inside the humidifier.

Do not turn on the humidifier without the water tank installed. If there is no water in the water tank, the Humidifier number setting should remain at 0.

Do not move the humidifier while there is water in the water tank.